Bücher

Glossar Schiffstechnik

2500 Erläuterungen von Fachbegriffen
2500 englische Bezeichnungen
500 Abbildungen
650 Abkürzungen in Langfassung
1000 Seiten
E-Book inside
Leseprobe
Online-Bestellung


Hydrostatic and Stability of Floating Structures

Leseprobe (42 Seiten): Inhaltsangabe, Abbildungsverzeichnis, Index etc. mit der jeweils ersten Seite der Kapitel.

Eine gebundene vollständige Ausgabe (396 Seiten, Farbdruck) kann im Sekretariat erworben werden.


ISSC 2012 Proceedings

Die Proceedings des
18th International Ship and Offshore
Structures Congress 2012
(2 Bände, Hardcover, 576 und 396 Seiten)
können über das Sekretariat erworben werden
Der 3. Band steht nur per download zur Verfügung!
Zu den ISSC 2012 Proceedings


Veröffentlichungen

2016

Eva Kleinsorge, Hannes Lindner, Jonas Wagner, Robert Bronsart, Ship Hull Form Optimization Using Scenario Methods , Proceedings PRADS2016,Copenhagen, Denmark, 2016
Downloads: BibTex   Paper
          
Sebastian H. Greshake and Robert Bronsart, Using subdivision surfaces to address the limitations of B-spline surfaces in ship hull form modeling, Proceedings PRADS2016, Copenhagen, Denmark, 2016
Downloads: BibTex   Paper
          
Lutz Kleinsorge, Hannes Lindner, Robert Bronsart, A Computational Environment for Rapid CFD Ship Resistance Analyses, Proceedings PRADS2016, Copenhagen, Denmark, 2016
Downloads: BibTex  Paper
          
Khaldoun Hmeshah, Quality Management Approach of Product Data Models for Shipbuilding, Dissertation, Universität Rostock, 2016
Downloads: BibTex   Abstract
          
Desta Milkessa Edessa, Framework for Hull Form Reverse Engineering and Geometry Integration into Numerical Simulation
Dissertation, Universität Rostock, 2016
Downloads: BibTex   Abstract            
             
             
2015

Wisam Jabary, An Enterprise Modeling Approach for the Early Ship Design, Dissertation, Universität Rostock, 2015
Downloads: Bibtex   Abstract   Thesis
    
Greshake, S.H., Bronsart, R. (2015). High Quality Ship Hull Form Representation Based on Subdivision Surfaces, Proceedings of International Conference on Computer Applications in Shipbuilding (ICCAS 2015), Vol. 2, pp. 81-90, ISBN 978-1-909024-43-4
Downloads: BibTex   Paper
    
Autorenteam (2015). Design Methods, Report of Committee IV.2, 19th International Ship and Offshore Structures Congress (ISSC), Lissabon, Portugal
    
Hmeshah, K., Erbach, N., Bronsart, R. (2015). Impact of production requirements on high-quality ship product data models, Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, DOI: 10.1177/1475090215597593
    
Edessa, D.M. and Bronsart, R. (2015). A contribution to curves network based ship hull form reverse engineering, International Shipbuilding Progress, Vol. 62, No. 1-2, pp. 17-42, DOI: 10.3233/ISP-150115      
Lindner, H., Schenk, S., Bronsart, R., Ebeling, B., Frömming, K., Kluwe, F. (2015). A Modular System Architecture for the Early Ship Design by Combining a 3D CAD System with a Product Data Management System, Proceedings of 14th International Conference on Computer and IT Applications in the Maritime Industries (CompIT), pp. 135-146, Ulrichshusen, Germany
    
Bronsart, R., Schenk, S., Lindner, H., Frömming, K., Ebeling, B. (2015). A Contribution to the Requirement Formalisation in the Early Stage of Ship Design, Proceedings of 12th International Marine Design Conference (IMDC), pp. 146-157, Vol.3, ISBN: 978-4-930966-04-9, Tokyo, Japan
    
Hmeshah, K., Bronsart, R. (2015). A Contribution to the Identity Assessment of Ship Structure Plate Parts. Journal of Ship Production and Design (SNAME), Vol. 31, no. 1, pp. 49-57, ISSN 2158-2866
    
2014

Hisette, Q., Jochmann, P., Bronsart, R. (2014). Simulation of Ice Management Operations, Proceedings of 24th International Ocean and Polar Engineering Conference (ISOPE 2014), Busan, Korea
    
Hmeshah, K., Bronsart, R. (2014). An Approach for Integrating Quality Management Methods with CAD-Systems in Ship Detail Design, Proceedings of 2nd International Conference on Maritime Technology and Engineering (MARTECH), Lisbon, Portugal, pp. 325-330, ISBN: 978-1-138-02727-5, Taylor & Francis Group, London, UK
    
Bronsart, R., Edessa, D.M., Kleinsorge, L. (2014). Assuring Quality Ship Hull Form Representations for Downstream Applications, Proceedings of 2nd International Conference on Maritime Technology and Engineering (MARTECH), Lisbon, Portugal, pp. 317-324, ISBN: 978-1-138-02727-5, Taylor & Francis Group, London, UK
    
Wagner, J., Binkowski, E., Bronsart, R. (2014). Scenario based Optimization of a Container Vessel with Respect to its projected Operating Conditions, International Journal of Naval Architecture and Ocean Engineering (IJNAOE), Vol. 6 (2014), pp. 496-506, pISSN: 2092-6782, eISSN: 2092-6790
    
2013

Bronsart, R., Jabary, W. (2013). An Approach for the Compartmentation in Early Ship Design, Proceedings of the 12th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS), Vol. 1, pp. 486-492, ISBN 978-89-950016-1-5, Changwon City, South Korea, 2013
 
Bronsart, R., Edessa, D.M., Kleinsorge, L. (2013). A Contribution to Automatic Ship Hull Form CAD Data Repairing, Proceedings of the 12th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS), Vol. 1, pp. 437-443, ISBN 978-89-950016-1-5, Changwon City, South Korea
    
Wagner, J., Binkowski, E., Bronsart, R. (2013). Scenario Based Optimization of a Container Vessel with Respect to its Projected Operating Conditions, Proceedings of the 12th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS), Vol. 1, pp. 583-588, ISBN 978-89-950016-1-5, Changwon City, South Korea
    
Bronsart, R., Edessa, D.M., Kleinsorge, L. (2013). Automatic Pre-Mesh CAD Data Repairing, International Journal of Mechanical Engineering and Applications, Vol. 1, No. 1, 2013, DOI:10.11648/j.ijmea.20130101.11
    
2012

Fricke, W., Bronsart, R. Eds. (2012). Proceedings of the 18th International Ship and Offshre Structures Congress, Volume 1 and 2, Schiffbautechnische Gesellschaft e.V., Hamburg Germany, 2012
    
Fricke, W., Bronsart, R. (2012). International Ship and Offshore Structures Congress (ISSC) 2012 in Rostock/Germany, Ships and Offshore Structures, Vol. 7, No. 4, pp. 351–355
    
Bronsart, R., Wagner, J. (2012). Build-up of Scenarios for Ship Life-Cycle – Methods for Descriptor Analysis, 11th International Marine Design Conference, Glasgow, UK
    
Kleinsorge, L., Hartig, K., Bronsart, R. (2012). About the Effect of Discretisation Schemes on the Results of Numerical Calculations of Ship Flow, 15th Numerical Towing Tank Symposium (NuTTS), pp. 129-133, Cortona, Italy
    
2011

Bronsart, R., Wagner, J. (2011). Considering the Life Cycle Performance in Ship Design, in Proceedings of "1st International Symposium on Naval Architecture and Maritime", pp. 253-260, , ISBN: 978-605-4123-19-3, Istanbul, Turkey
    
Bronsart, R., Clauss, G., Haase, M., Kauffeldt, A., Kornev, N., Otten, N. (2011). Design and Maneuvering Simulation of an Autonomously Acting Free Fall Rescue Catamaran, in Proceedings of "1st International Symposium on Naval Architecture and Maritime", ISBN: 978-605-4123-19-3, Istanbul, Turkey
    
Bronsart, R., Kleinsorge, L. (2011). Integration of CFD Grid Generation Tools into the Ship Design Process, in Proceedings of "1st International Symposium on Naval Architecture and Maritime", pp. 241-251, ISBN: 978-605-4123-19-3, Istanbul, Turkey
    
Haase, M., Winkler, S., Bronsart, R., Kornev, N. (2011). Experimental Validation of Viscous Free Surface Flow Computation around Fast NPL Catamarans at Large Drift Angles, in Proceedings of "1st International Symposium on Naval Architecture and Maritime", pp. 355-366, ISBN: 978-605-4123-19-3, Istanbul, Turkey
    
Haase, M., Kornev, N., Bronsart, R. (2011). Validation of Viscous Free-Surface Flows around NPL Catamarans in Oblique Motion at Moderate Froude Number, in Proceedings of „14th Numerical Towing Tank Symposium (NUTTS)“, Southampton, UK
    
Bronsart, R., Buch, T., Haase, M., Ihde, E., Kornev, N., Kurowski, M., Lampe, B.P. (2011). Integrated Software-In-The-Loop Simulation of an Autonomously Acting Rescue Boat, in Proceedings of "International Conference on Computer Appplications in Shipbuilding (ICCAS) Volume III", pp. 187-194, ISBN: 978-1-905040-87-2, Trieste, Italy
    
Kleinsorge, L., Kornev, N., Bronsart, R., Hannker, B. (2011). Openfoam's CFD Workbench and its Integration into the Initial Design Process, in Proceedings of "International Conference on Computer Appplications in Shipbuilding (ICCAS)", Volume 1, pp. 1-8, ISBN: 978-1-905040-87-2, Trieste, Italy
    
Wagner, J., Bronsart, R. (2011). A Contribution To Scenario Based Ship Design, in Proceedings of "International Conference on Computer Appplications in Shipbuilding (ICCAS)", Volume 1, pp. 47-52, ISBN: 978-1-905040-87-2, Trieste, Italy
    
2010

R. Bronsart, A Contribution to Quality Assurance of Ship Product Model Data, in Proceedings of „11th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS 2010)“, Rio de Janeiro, Brasilien, 2010
                
M. Haase, R. Bronsart, N. Kornev, D. Nikolakis, Simulation of the Dynamics of an Autonomously Acting Small Catamaran for Search and Rescue Process, 8th IFAC Conference on Control Applications in Marine Systems, (CAMS 2010), Rostock, 2010
                
R. Bronsart, G. Clauss, The Network of German Universities offering NAOE Master Programs, International Mermaid Congress 2010, Istanbul, Türkei, 2010

2009
                
D. Sinter, R. Bronsart, W. Sucharowski, Qualitätssicherung durch Kommunikationsanalyse am Beispiel schiffbaulicher Kooperationen, Unternehmenskybernetik 2020, Betriebswirtschaftliche und technische Apekte von Geschäftsprozessen, Seiten 175-179, Hrsg.: K. Henning und Chr. Michulitz, ISBN 978-3-428-13121-1, Duncker und Humblot, Berlin, 2009
                
R. Bronsart, A. Geitmann, Application of Rules for Quality Control of Product Data, The International Conference on Computer Applications in Shipbuilding (ICCAS 2009), Shanghai, China, 2009
                
Autorenteam, Design Principle and Criteria, Report of Committee IV.1, 17th International Ship and Offshore Structures Congress (ISSC), Seoul, Korea, 2009
                
R. Bronsart, A.Geitmann, D. Sinter, W. Sucharowski, Automated Error Detection in Ship Structural Design, 10th International Marine Design Conference, Trondheim, Norwegen, 2009
                
R. Bronsart, M. Zimmermann, Knowledge Based Design Patterns for Detailed Ship Structural Design, 10th International Marine Design Conference, Trondheim, Norwegen, 2009

2008
               
R. Bronsart, A. Geitmann, Using a rule Based Computing System for Automated Quality Checking, 9th International Conference on Marine Sciences and Technologies, Varna, Bulgarien, 2008
                
R. Bronsart, Quality Control of Ship Product Data by the Application of Implemented Rules, Schiffbauforschung, Vol. 1, Oktober 2008

2007
               
R. Bronsart, G. Knieling, Automated Knuckle Detection in Ship Hull Forms, Journal Ship Research Technology, Vol. 54, 2007
                
R. Bronsart, M. Zimmermann, A Contribution to Knowledge Based Engineering Methods in Ship Structural Design, 10th International Symposium on Practical Design of Ships and Other Floating Struktures (PRADS), Houston, USA, 2007
                
M. Abdel-Maksoud, R. Bronsart, G.F. Clauss, W. Fricke, U. Glowalla, T. Rung, M.-C. Wanner, P. Müsebeck, E-Learning Infrastructure for Naval Architecture and Ocean Engineering Education, 13th International Conference on Computer Applications in Shipbuilding (ICCAS), Portsmouth, England, 2007
                
R. Bronsart, A. Geitmann, A Contribution to Increase Productivity in Ship Detailed Design, 13th International Conference on Computer Applications in Shipbuilding (ICCAS), Portsmouth, England, 2007                  
R. Bronsart, et al., Knowledge Based Quality Checking of Ship Product Data, 13th International Conference on Computer Applications in Shipbuilding (ICCAS), Portsmouth, England, 2007
                
R. Bronsart, G. Knieling, Automatic Structured Surface Mesh generation for Hydrodynamic Analysis, 13th International Conference on Computer Applications in Shipbuilding (ICCAS), Portsmouth, England, 2007                  
R. Bronsart, M. Zimmermann, A System for Management and Appliction of Standards in Ship Structural Design, Journal of Ship Production, Vol. 23, August 2007
                
R. Bronsart, P. Müsebeck, E-Learning for Higher Education in Naval Architecture and Ocean Engineering, 6th International Conference on Computer Applications and Information Technology in the Maritime Industries (COMPIT), Cortona, Italien, 2007
                
R. Bronsart, A. Geitmann, Quality Enhancement by using Standardized Parts and Methods in Ship Structural Design, 6th International Conference on Computer Applications and Information Technology in the Maritime Industries (COMPIT), Cortona, Italien, 2007

2006
               
R. Bronsart, Schiffstechnische Ausbildung in Deutschland, Jahrbuch der Schiffbautechnischen Gesellschaft, 2006
                
R. Bronsart, Th. Koch, W. Grafe, V. Petkov, An Infrastructure for Inter-organizational Collaboration in Ship Design and Production, 9th International Marine Design Conference, Ann Arbor, USA, 2006                  
R. Bronsart, et al., Konstruktionsstandards für schiffbauliche Strukturen zum Einsatz in CAD-Systeme, Statustagung Schifffahrt und Meerestechnik, Bundesministerium für Wirtschaft und Technologie, 2006                  
R. Bronsart, P. Müsebeck, The German Network of Naval Architecture and Ocean Engineering (mar-ing) University Programmes, International Conference on E-Learning (ICEL), Montreal, Kanada, 2006                  
Autorenteam, Design Principle and Criteria, Report of Committee IV.1, 16th International Ship and Offshore Structures Congress (ISSC), Southampton, 2006
               
R. Bronsart, A. Geitmann, M. Zimmermann, An Application for the Managment of Standardized Parts in Steel Structural Design, 5th International Conference on Computer Applications and Information Technology in the Maritime Industries (COMPIT), Cortona, Italien, 2006
                
R. Bronsart, G. Knieling, Automated Knuckle Detection in Ship Hull Forms, 5th International Conference on Computer Applications and Information Technology in the Maritime Industries (COMPIT), Cortona, Italien, 2006
                
M. Zimmermann, R. Bronsart, Application of Knowledge Based Engineering Methods for Standardization and Quality Assurance in Ship Structural Design, World Maritime Technology Conference (WMTC), London, UK, 2006
                
R. Bronsart, G. F. Clauss, The network of German universities for a joint NAOE master program. Schiff & Hafen 06/2006. 58. Jahrgang. Hamburg: Seehafen Verlag
                
R. Bronsart, M. Zimmermann, A System for Management and Application of Standards in Ship Structural Design, Society of Naval Architects Ship Production Symposium, Fort Lauderdale, USA, 2006

2005
               
R. Bronsart, H.-J. Shaw, W. Tann, Integrating the Collaborative Environment in Shipbuilding: an Implementation Strategy, Journal of Ship Production, Vol. 21, Februar 2005
                
R. Bronsart, U. Cantow, W. Grafe, Th. Koch, B.J. Miller, A Contribution to CAE System Integration in Ship Design, Society of Naval Architects Ship Production Symposium, Houston, USA, 2005
                
R. Bronsart, W. Grafe, Th. Koch, A Collaborative Platform for Ship Design, 12th International Conference on Computer Applications in Shipbuilding (ICCAS), Busan, Korea, 2005
                
R. Bronsart, K. Stenzel, M. Zimmermann, Knowledge Based Engineering Methods for Ship Structural Design, The 12th International Conference on Computer Applications in Shipbuilding (ICCAS), Busan, Korea, 2005
                
R. Bronsart, S. Gau, D. Luckau, W. Sucharowski, Enabling Distributed Ship Design and Production Processes by an Information Integration Platform, 12th International Conference on Computer Applications in Shipbuilding (ICCAS), Busan, Korea, 2005
                
R. Bronsart, U. Cantow, V. Petkov, ISO 10303-214 Core data for Automotive Mechanical Design Processes – A Product Model to be used in the Maritime Industry?, 3nd International EuroConference on Computer Applications and Information Technology in the Marine Industries (COMPIT), Hamburg, 2005
                
R. Bronsart, M. Zimmermann, Knowledge Modelling in Ship Design using Semantic Web techniques, 4th International EuroConference on Computer Applications and Information Technology in the Marine Industries (COMPIT), Hamburg, 2005

2004
               
R. Bronsart, S. Gau, V. Petkov, Ship Design and Production in Distributed Networks, 7th International Conference on Marine Science and Technology (Black Sea 2004), Varna, 2004
                
R. Bronsart. S. Gau, D. Lickau, W. Sucharowski, Communication in Ship Design Networks, 3rd International EuroConference on Computer Applications and Information Technology in the Marine Industries (COMPIT), Siguenzy, Spanien, 2004
                
R. Bronsart, G. Knieling, Automatic Generation of a Panel based Representation of a Ship Hull Surface for Wave Resistance Calculation, 9th International Symposium on Practical Design of Ships and other Floating Structures (PRADS), Lübeck, 2004
                
R. Bronsart, St. Gau, Configuration of Cross Enterprise Product Development in Shipbuilding, The 9th International Symposium on Practical Design of Ships and other Floating Structures (PRADS), Lübeck, 2004

2003
        
R. Bronsart, U. Cantow, V. Petkov, Linking Knowledge to Product Data, 2nd International EuroConference on Computer Applications and Information Technology in the Marine Industries (COMPIT), Wedel, 2003
                
R. Bronsart, U. Cantow, V. Petkov, Wissensmodellierung als Basis für „Rule Driven Design“ - ein Prototyp für den Einsatz in der schiffbaulichen Unikatentwicklung, 1. Gemeinsames Kolloquium Konstruktionstechnik der Universitäten Rostock, Magdeburg und Dresden, Kühlungsborn, 2003                  
Autorenteam, Design Principle and Criteria, Report of Committee IV.1, 15th International Ship and Offshore Structures Congress (ISSC), San Diego, 2003

2002
               
R. Bronsart, U. Cantow, V. Petkov, Knowledge Modelling and Implementation Methods in Distributed CAE-Environments, 11th International Conference on Computer Applications in Shipbuilding (ICCAS), Malmö/Schweden, 2002

2001
               
R. Bronsart, S. Gau, Collaborative Design and Production in Shipbuilding Networks, Navy and Shipbuilding Nowadays, St. Petersburg, 2001
                
R. Bronsart, U. Cantow, V. Petkov, Integration of a Class Rule Server in the CAE-Environment for Ship Design, Navy and Shipbuilding Nowadays, St. Petersburg, 2001

2000
              
R. Bronsart, S. Gau, A Platform for Co-operative Inter-organizational Work in Design and Production - Information Management in Collaborative Shipbuilding, 1st International EuroConference on Computer Applications and Information Technology in the Marine Industries, Potsdam, 2000
                
Autorenteam, Design Methods, Report of Committee IV.2, 14th International Ship and Offshore Structures Congress, Nagasaki, 2000

1999
               
R. Bronsart, Tools for the Assessment of the Ship Structural Steelwork – a State of the Art Survey, 10th International Conference on Computer Applications in Shipbuilding, Boston/Cambridge, 1999                  
R. Bronsart, S. Gau, An Integrated Design and Production Environment for Ship Machinery Systems, 10th International Conference on Computer Applications in Shipbuilding, Boston/Cambridge, 1999                  
R. Bronsart, S. Gau, Kommunikation in verteilter Konstruktion und Fertigung - Anforderungen und Lösungsansätze, Schiffbauforschung, Heft 4, 1999

1998
               
R. Bronsart, Informationstechnik im Schiffbau, Handbuch der Werften XXIV, Seite 15-75, Hansa-Verlag, Hamburg, 1998

1997
              
Autorenteam, Design Methods, Report of Committee IV.2, 13th International Ship and Offshore Structures Congress, Trondheim, Volume I, Seite 407 - 473, Elsevier, Oxford, 1997
                
R. Bronsart, M. Heinemann, H. Zorn, Algorithmen zur Bestimmung von Fertigungsmaßen unter Berücksichtigung systematischer Thermodeformationen für die Genaufertigung im Schiffskörperbau, BMBF-Statusseminar, Hamburg, 1997
                
R. Bronsart, P. Nikolay, H. Zorn, Prediction and Management of Thermal Shrinkage in Ship Production, 9th International Conference on Computer Applications in Shipbuilding, Yokohama, 1997

1994
               
R. Bronsart, The Ship Product Model - Requirements by New Survey Procedures for Ships in Operation, 8th International Conference on Computer Applications in Shipbuilding, Bremen, 1994

1993
               
R. Bronsart, U. Rabien, Interaction of Design and Anlysis: Integration of CAD and FEA, 3rd Shipping Conference (NEVA'93), St. Petersburg 1993
                
R. Bronsart, U. Rabien, Use of CAD Data for FE Modelling of Ship Structures, VIth Congress of the International Maritime Association of Mediteranean, Varna, 1993

1992
               
R. Bronsart, Produktmodell Schiff - Anforderungen der Klassifikationsgesellschaft, Jahrbuch der Schiffbautechnischen Gesellschaft, 1992

1991
               
R. Bronsart et al. Innovative Anwendungen der Informationstechnik im Schiffbau (ITiS), Bericht des Forschungszentrum des Deutschen Schiffbaus, 233/1991, Hamburg, 1991
                
R. Bronsart et al. Data Exchange between CAD and FEA-Systems, Schiff und Hafen/ Seewirtschaft, Vol.43, Nr. 8, 1991

1990
               
R. Bronsart, Design and Management of a Product Model, Schiffstechnik (Ship Technology Research), Vol 37, Nr. 1, 1990
                
R. Bronsart, Ein Datenmodell für schiffbauliche Stahlstrukturen, Fortschrittsberichte VDI, Reihe 20, Nr. 21, Düsseldorf, 1990

1988
               
R. Bronsart, E. Lehmann, A Datamodel for Ship Steel Structures, 6th International Conference on Computer Applications in Shipbuilding, Shanghai, 1988
                
R. Bronsart, E. Lehmann, Strukturanalyse mit Hilfe des Rechners, Jahrbuch der Schiffbautechnischen Gesellschaft, 1988

1987
               
R. Bronsart, STEERBEAR - Datenbasis Zugriffsroutinen für FORTRAN Programme, Bericht 87-05-01, Technische Universität Hamburg-Harburg, Arbeitsbereich Schiffstechnische Konstruktionen und Berechnungen, 1987
                
R. Bronsart, T. Koch, Unterstützung der Strukturgenerierung durch Macroprozessoren, Jahrbuch der Schiffbautechnischen Gesellschaft, 1987
                
R. Bronsart, CAD/CAM in der Schiffstechnik, HANSA, Vol. 124, Nr. 10, 1987

1978
               
R. Bronsart, Die Programme PRINT1D und PRINT2D für grafische Darstellungen mit dem Zeilendrucker, Bericht 29, Institut für Entwerfen von Schiffen und Schiffstheorie, 1978                  
                   
Vorträge

Knowledge based Ship Structural Design
Dept. of Naval Architecture and Ocean Engineering, Graduate School of Engineering, Osaka University, Osaka, Japan, 2009

What is the Problem with CAD in Ship Design?
Seoul National University, Research Institute of Marine Systems Engineering, Seoul, Korea, 2009

The Impact of the Downturn of World Economy on the European Maritime Industry
Seoul National University, Research Institute of Marine Systems Engineering, Seoul, Korea, 2009

Effiziente Kommunikation in schiffstechnischen Entwicklungsnetzwerken – Was bedeutet das?
PROSTEP Schiffbau Fachforum, Rostock, 2008

SWOT Analyse der Werften und Zulieferindustrie in M-V; Maritime Ausbildungs- und Forschungslandschaft in Deutschland,
Vorstandssitzung der VDMA Arbeitsgemeinschaft Schiffbau- und Offshore-Zulieferindustrie, Warnemünde, 2007

Konstruktionsstandards für schiffbauliche Strukture zum Einsatz in CAD-Systemen,
Statusseminar des Bundesministeriums für Wirtschaft und Technologie, Hamburg, 2006

Einsatz von Konstruktionsstandards in CAD-Systemen,
Fachausschuss Konstruktion und Festigkeit der Schiffbautechnischen Gesellschaft, Hamburg, 2006

The German Maritime Industry United Ship Design & Development Center,
Koahsiung, Taiwan, 2005

Naval Architecture and Ocean Engineering Study Program at the University of Rostock,
National Taiwan University, Taipei, Taiwan, 2005

Schiffstechnische Ausbildung und Fortbildung in Deutschland,
Jahrestagung Schiffbautechnische Gesellschaft, Berlin, 2005

Aspekte der Kooperation im Entwicklungsprozess maritimer Systeme,
Kolloquium Schiffstechnik, Universität Duisburg Essen, 2005

Unterstützung der Produktentwicklung im Schiffbau durch Kooperationswerkzeuge,
Kolloquium Arbeitsbereiche Schiffbau der Technischen Universität Hamburg-Harburg, 2005

Schiffbau Informations- und Kommunikationsinfrastruktur
Statusseminar des Bundesministeriums für Bildung und Forschung, Hamburg, 2004

Brauchen wir noch Schiffbauer – oder können Computer alles besser?
Seminar Sea the Future – Meer als eine Alternative, Institut für Land- und Seeverkehr, TU-Berlin, 2003

Information and Communication Technologies in Ship Design and Production
University of Michigan, Department of Naval Architecture and Marine Engineering, 2003

Naval Architecture and Ocean Engineering Study Program at Rostock University
University of Michigan, Department of Naval Architecture and Marine Engineering, 2003

Werkzeuge zur Unterstützung des schiffbaulichen Konstruktionsprozesses
Sprechtag der Schiffbautechnischen Gesellschaft: Moderne Konstruktions und Dimensionierungsprozesse im Schiffbau, Hamburg, 2002

„Schwimmen“ aus der Sicht des Schiffbauers
Interdisziplinäre Vorlesungsreihe Biotechnologie an der Universität Rostock, Rostock, 2002

Knowledge Modelling and Implementation Methods in Distributed CAE-Environments
The 11th International Conference on Computer Applications in Shipbuilding, Malmö, 2002

Informationstechnik im Schiffbau
Festkolloquium 50 Jahre Ingenieurausbildung an der Universität Rostock, Rostock, 2001

'Design for Production' am Beispiel Genaufertigung im Schiffbau – Anforderungen an die CAE-Systemintegration Seminar Schiffstechnik,
Technische Universität Hamburg-Harburg, 2000

A Platform for Co-operative Inter-organizational Work in Design and Production - Information Management in Collaborative Shipbuilding
The 1st International EuroConference on Computer Applications and Information Technology in the Marine Industries, Potsdam, 2000

Kooperation im Entwurf auf der Basis einer Informations- und Kommunikationsplattform
Sprechtag der Schiffbautechnischen Gesellschaft: Entwurf und Sicherheit von Handelsschiffen, Hamburg, 2000

Wie wird das Internet den Schiffbau verändern?
Kolloquium der Arbeitsbereiche Schiffbau der Technischen Universität Hamburg-Harburg, Hamburg 2000

Tools for the Assessment of the Ship Structural Steelwork – a State of the Art Survey
The 10th International Conference on Computer Application in Shipbuilding, Boston/Cambridge, 1999

Kommunikation in verteilter Konstruktion und Fertigung - Anforderungen und Lösungsansätze
3. Schiffbautag Mecklenburg-Vorpommern, Rostock, 1999

Informationstechnik als Basis für Entwurf, Konstruktion und Produktion von Schiffen
Kolloquium des Instituts für Schiffstechnik, Gerhard-Mercator Universität, Duisburg, 1998

Moderne Werften - Sichere Schiffe
Tage der Forschung der Universität Rostock, 1998

Prediction and Management of Thermal Shrinkage in Ship Production
The 9th International Conference on Computer Applications in Shipbuilding, Yokohama, 1997

Schiffe und Software - Unterschiede und Gemeinsamkeiten
Jahrestagung der Gesellschaft für Informatik - Software Engineering im Unterricht an Hochschulen, Rostock, 1997

The Ship Product Model - Requirements by New Survey Procedures for Ships in Operation
The 8th International Conference on Computer Applications in Shipbuilding, Bremen, 1994

A Datamodel for Ship Steel Structures The 6th International Conference on Computer Applications in Shipbuilding,
Shanghai, 19882016